FRIULINOX AIC12

MAIN FEATURES
Monobody construction with internal and external finish in
Stainless Steel AISI 304 (Scotch-Brite satin)
New body with increased dimensions for a better load
Inside rounded corners for easy cleaning
Increased inside net height to introduce 44 trays with 30 mm.
pitch
External back and bottom in AISI 304 stainless steel
High-density polyurethane’s insulation (aprox. 42 kg/m3),
without HCFC
85 mm insulation thickness
Engine compartment sides foamed for better soundproofing
and greater strength
Front opening panel to facilitate periodic maintenance
(condenser cleaning)
Full height ergonomic handle with right and left grip and
magnetic seals on 4 sides
Self-closing doors with 100° opening lock
INTERNAL SETUP:
Uprights and ‘L’ guides in stainless steel, interlock fitted to
facilitate cleaning
COOLING SYSTEM:
System mounted on a single block structure with steps, which
enables optimal use of internal space
High-ventilation evaporator to ensure the highest efficiency of
the cooling system
Automatic evaporation of condensation water through the
compressor coil
Ecological refrigerant R290 for chiller and freezer condensing
units
Indirect ventilation thanks to the full height channeling system
for optimal air circulation and uniform temperature distribution
Hot gas defrost and defrost water evaporation system without
adding energy WDS (Water dissipation system)
CONTROLS AND SAFETY DEVICES:
Capacitive Touch Screen control with 5 “display for program
selection, temperature, humidity and ventilation speed
adjustment
The alarms and the data and the operating parameters, the
HACCP reports, can be viewed and managed via the IOT
connection to the COLD CLOUD of Friulinox
Humidity probe for regulation of RH% from 40% to 90%
Integrated network card with Ethernet output included (Wi-Fi
optional)
Compressor protected by termic overload cut-out with
automatic reset
Micro-switch stops internal fan when door is open
Door lock and key